Whole-Home Humidifier Installation & Service
When the heat runs all winter, indoor air gets dry. Many Bucks County homeowners notice static shocks, dry skin, gaps opening in wood floors and trim, and rooms that feel cooler than the thermostat says. A whole-home humidifier connects to your furnace or air handler and adds moisture to the air throughout the house — no portable units to fill and clean.
Edge Mechanical is Evan Gutman, a Richboro-based HVAC technician serving Bucks County since 2014. We install new humidifiers and service the ones you already have.
Common problems we fix
If you already have a whole-home humidifier, these are the usual issues:
- Humidifier not adding any moisture
- Water pad clogged with mineral scale
- Water leaking or overflowing from the unit or drain
- Solenoid valve stuck open or closed
- Humidistat not controlling the unit
- Condensation on windows from humidity set too high
What a visit looks like
For service, Evan checks the water supply and solenoid valve, the pad or panel, the drain, the bypass damper, and the humidistat, then confirms the unit runs when the furnace calls for heat. Pads are typically replaced at the start of each heating season.
For a new install, the free estimate looks at your furnace or air handler, where the unit can mount, the water and drain connections, and which style fits your system.
$169 diagnostic, credited toward your repair when it's done on the same visit. Install estimates are free.
Repair or replace?
Most humidifier problems are simple: a new pad, a cleared drain, a solenoid valve, or a humidistat adjustment. Those are quick fixes.
Replacement makes sense if the housing is cracked, the unit is badly corroded, or it doesn't suit your current furnace — for example after a system replacement. If you're replacing your furnace anyway, it's a good time to talk about adding one.
New system now, monthly payments over time
Check your rate in about 60 seconds with a soft credit check. Loans from $1,000 to $100,000 with fixed monthly payments.
What you can safely check first
- Make sure the humidistat is turned on and set to a sensible level
- Check that the bypass damper on the duct is set to the winter position
- Look at the water pad — if it's crusted with white scale, it's due for replacement
- Make sure the water supply valve to the humidifier is open
- If windows fog or drip, turn the setting down
Leave water line, drain, and electrical work to a technician. Too much humidity can cause condensation problems, so it's worth having the control set up correctly.
Frequently asked questions
Does a whole-home humidifier work with my furnace?
Most forced-air furnaces and air handlers can have one added. We confirm the fit during a free estimate.
What humidity level should I set in winter?
It depends on outdoor temperature; colder days call for a lower setting to avoid window condensation. We'll set it up and show you how to adjust it.
How often does the humidifier pad need changing?
Typically once a year, at the start of the heating season. Homes with hard water may need it more often.
Can I have a humidifier with a heat pump or boiler?
With a ducted heat pump, often yes. Boilers with radiators or baseboard don't have ductwork, so a whole-home humidifier usually isn't an option there.
What does a humidifier service visit cost?
Repairs start with a $169 diagnostic that's credited toward your repair when it's done on the same visit. Install estimates are free.
What does a new whole-home humidifier cost installed?
A bypass humidifier (Aprilaire 600) is $950 installed, a fan-powered unit (Aprilaire 700) is $1,150 installed, or $500 labor-only if you supply the unit.
Ready when you are
Pick a time online, or call and Evan will pick up. No heat or no cooling right now? Call — emergencies aren't booked online.
